Ergonomic Work Tools to Reduce Labor Fatigue
DOI:
https://doi.org/10.55927/eajmr.v5i10.21Keywords:
Work Tools, Ergonomics, Work FatigueAbstract
Work tools need to be made and arranged ergonomically so that the position at work will also be egonomical so that work is not easily tired. In this paper, it is designed decisively. Data is taken from several opinions of experts as well as from research results. It is commonly called a literature study. Then an analysis is also carried out descriptively, namely presentation. Conclusion: First. The unergonomic condition of facilities and infrastructure as well as the work environment is the dominant factor. Second. To be able to work egonomically, the tools must be arranged so that the workers are in an ergonomic working position, then: 1). Work not bend over, there is no body moment and work must remain upright by adjusting the work tools; 2). Use the work with more muscle tips moved by the muscle pieces; 3). Balance between the work task and the work capacity; 4). Use the work energy 5 kcal/minute to 5.2 kcal/minute so that you do not get tired easily; 5). Use in working at VO2 max.
References
Fachrykarut, 2026, Pekerjaan dan peralatan kurang ergonomis, AdChoires, App Strores, Jakarta.
Ribka Gloria Linoe, Oksfriani Jupi Sumampouw, Ribka Elisabeth, 2022, Postur kerja terkait dengan kelelahan kerja?, SITEKIN: Jurnal Sains, Teknologi dan Industri, Vol. 19, No. 2, Juni 2022, hlm.227 – 233, ISSN 2407 - 0939 cetak/ISSN 2721 - 2041 online, Laboratory of Environmental Health and Occupational Health, Faculty of Public Health, Sam Ratulangi University, Sulawesi Utara.
Yohana Ludowika Afean Pah, Luh Putu Ruliati, Mustakim Sahdan, 2025, Analisis Faktor Ergonomi dengan Kelelahan Kerja dan Keluhan Musculoskeletal Disorders pada pekerja Tenun Ikat di Desa Numponi Kabupaten Malaka, Vitamin: Jurnal Ilmu Kesehatan Umum Volume 3, Nomor 2, April 2025 e-ISSN: 3031-0105; p-ISSN: 3031-0091, Hal. 157-164, Universitas Nusa Cendana, Kupang.
Jessica Gabriella Budi Santosa, 2024, Faktor-Faktor Risiko yang Berhubungan dengan Kelelahan Kerja Pada Pekerja PT X, Antigen: Jurnal Kesehatan Masyarakat dan Ilmu Gizi, Vol.2 No.4 November 2024, e-ISSN: 3026-6092; p-ISSN: 3026-6084, Hal 79-93, Program Studi Kesehatan Masyarakat, Fakultas Kedokteran, Program Studi Kesehatan Masyarakat, Fakultas Kedokteran, Universitas Negeri Semarang.
Tyastiana Arbianisa, Agus Suwarni, Muryoto, 2026, Analisis status ergonomi posisi kerja dan kelelahan kerja pada tenaga kerja di cv. Sinar albasia utama kalasan, sleman, provinsi D. I. Yogyakarta, Sanitasi, Jurnal Kesehatan Lingkungan, Vol.7, No.4, Mei 2016, Hal 187 – 192, Poltekkes Kemenkes Yogyakarta.
Persadalab, 2024, Hindari Risiko Ergonomi dalam Lingkungan Kerja, PT Graha Mutu Persada, Kemenaker, Mojokerto.
Alodokter, 2026, Penyebab denyut nadi sampai 120 kali per menit, Kementrian Kesehatan RI, Jakarta.
Joshua Conrad, 2026, Pengujian VO2 Max: Bagaimana Cara Mengukur dan Meningkatkan Hasil Anda?, WebMD LLC, Amerika.
Durnin, J. V. G. A., and R. Passmore, 1967, Energy, Work and Leisure, Heinmann, London.
Grandjean E, 1986, Fitting The Task To The Man: An Ergonomics Approach, Taylor & Francis, Philadephia.
Ikrama Wardianti Basri, 2024, Hubungan Faktor Egonomi Dengan Kelelahan Kerja Pada Penjahit Di Pasar Sentral Kabupaten Soppeng, kripsi, Program Studi Kesehatan Masyarakat Departemen Keselamatan Dan Kesehatan Kerja Fakultas Kesehatan Masyarakatuniversitas Hasanuddin, Makassar.
Kemudian, Nopriadi, 2026, Mengatasi kelelahan kerja ergonomis, Advance human understanding, Scrbd Inc, Amerika.
Siti Nazwa Ramadhani, Nurul Hasanah Lubis, Marsya Winanda, Ade Asiilah Asri, Rahmi Wardani, 2026, Analisis Beban Kerja dan Kelelahan Pegawai Berdasarkan Penerapan Ergonomi di Kantor BAPENDA Sumatera Utara Bagian Aset melalui Metode SchuIding Mute, ISSN 2776-771X (Online) ISSN 2962-570X (Printed), Faculty of Education University of Pahlawan Tuanku Tambusai Jalan Tuanku Tambusai 23 Bangkinang, Kampar, Riau.
.png)
